How to Program GE Universal Remote (without or with Code)
A GE Universal Remote can control multiple devices like TVs, DVD players, soundbars, and streaming devices, making it an excellent tool for reducing the clutter of multiple remotes. Programming a GE Universal Remote to work with your devices can be done either with or without a code. Here’s a step-by-step guide on how to program your GE Universal Remote both ways.
Method 1: Programming with a Code
The most straightforward way to program your GE Universal Remote is by using the specific code for your device, which can be found in the remote’s manual or on the official GE website.
Steps to Program GE Universal Remote with a Code:
1. Turn on the device you want to program (e.g., TV, DVD player).
2. Press and hold the “Setup” button on your GE Universal Remote until the red indicator light remains on, then release the button.
3. Press the device button on the remote (e.g., TV, DVD, or AUX), depending on what device you are programming.
4. Enter the device code using the number buttons on the remote. You can find the code for your specific device in the remote’s manual or search for it online. Once entered, the red light will turn off.
5. Test the remote by pressing the power button. If the device turns off, you’ve successfully programmed the remote.
What If the Code Doesn’t Work?
– If the device doesn’t turn off, try entering a different code for your device from the list in the manual. Repeat the steps above until you find a code that works.
– If none of the codes work, proceed to the next method: auto-code search.
Method 2: Programming without a Code (Auto-Code Search)
If you can’t find the code for your device or the provided codes don’t work, you can use the auto-code search feature, where the GE Universal Remote will scan through all the possible codes until it finds the right one.
Steps to Program GE Universal Remote without a Code:
1. Turn on the device you want to program.
2. Press and hold the “Setup” button until the red light stays on, then release.
3. Press the device button (TV, DVD, etc.) on the remote.
4. Press and release the “Power” button repeatedly. Each time you press, the remote will send a different code to the device. Keep pressing until the device turns off.
5. Press the “Enter” or “OK” button to save the code when the device turns off.
Note: This process can take a few minutes since the remote needs to cycle through all the available codes.
Tips for Success
– Make sure the device you’re programming is powered on during setup.
– Always press the correct device button (TV, DVD, etc.) on the remote before programming.
– If the auto-code search doesn’t work, try redoing the process or check the remote’s manual for troubleshooting tips.
Programming your GE Universal Remote with or without a code is a simple process that can significantly improve your entertainment experience. Whether you have the specific code or need to use the auto-code search method, following the steps outlined above will help you quickly get your universal remote up and running.